PTQ Q2 2022 Issue

Flexibility is profitable

Flexibility Matters

tray vapor loads and internal liquid reflux rates. Keeping the upper pumparounds loaded can also help avoid low pumparound return or tower overhead temperatures that condense water and cause salting or corrosion problems. It may even make sense to turn off a lower pumparound. L ONG - TERM SOLUTIONS inking longer-term, cost-effective revamps can add critical flexibility to allow for wide swings in unit throughput and crude blends while still operating in control. e right process design enables operators to consistently:

In uncertain times, refineries can maximize profit (or at least minimize loss) through flexible operations. Crude units are the first link in the refinery processing chain, and making large changes in crude diet or throughput stresses even the most state-of-the-art unit. S HORT - TERM STRATEGIES Certain operating strategies can maximize reliability, yields, and product qualities. Some practical short- term options include: • K EEP THE BOTTOMS STRIPPING STEAM

At turndown, consider maintaining normal crude tower and vacuum tower bottoms stripping steam rates and lowering heater outlet temperature to control cutpoint. is allows the stripping steam to do the work while heater firing is minimized to protect the heater tubes at lowmass velocities. L OWER THE PRESSURE Lowering tower pressures at turndown lowers the density of the vapor, which keeps trays loaded and can avoid weeping and loss of efficiency. Lower pressure also lowers draw temperatures, increasing pumparound rates and hopefully avoiding minimum flow limits for pumps and tower internals. M OVE HEAT UP In multi-pumparound towers, shifting heat to the upper pumparounds at turndown increases

Control desalter inlet temperature,

• Control preflash column inlet temperature and naphtha production, • Control pumparound return temperatures and rates independent of pumparound heat removal requirements, and • Precisely control vacuum column top pressure. is advice is, of course, generic. To discuss challenges unique to your own crude/vacuum unit, give us a call. Process Consulting Services believes crude units should have flexibility. We believe that revamp solutions should be flexible too - one size doesn’t fit all. We look forward to working together to find the most cost-effective and reliable solution to your crude processing problems.

3400 Bissonnet St. Suite 130 Houston, TX 77005, USA

+1 (713) 665-7046 info@revamps.com www.revamps.com

Powered by