Our companies in the Moxba Group are recyling base metals, not only coming from spent catalysts, but also from a large number of other metal bearing waste streams. We recycle those metals into fertilizers, alloys and chemicals, of which some of the latter are returned to the catalyst industry. We strive to be the best in every aspect of our processes, from safety, compliance, no waste, up to using the lowest amount of energy possible. We are leading in sustainability Something we’re very proud of at Moxba, is the large variety of products we make from waste, transforming them into new, valuable raw materials and/or end products, even what normally is considered waste. How low can you go? By choosing the right technologies and the right renewable energy sources, we contribute largely to lowering worldwide CO₂-emissions. Our flagship alloys, produced from scrap metal and catalyst waste streams, saves 85% (!) CO₂-emissions compared to mining the same materials. Moxba - Your Partner in Sustainable Recycling When it became clear that there is a world-wide need to support avoiding depletion of metals, we knew we could play a dominant role in the recycling of spent catalysts in a sustainable way. Lowering CO₂-emissions was a big part of this discussion, and thus we chose to focus on recycling the metals in a way that the CO₂ produced per unit of recycled metal is as low as possible. Naturally, we are striving hard to even increase this number of 85% CO₂- savings over the years to come. There are many steps we’ve already taken, like: processing other metal-containing waste streams and also fully recycling Sulphur, present on the spent refinery catalysts, into fertilizer components. And yet, there are a lot more steps on the way forward. With around 55,000mt of spent catalysts recycling per year, and saving > 80,000mt of CO₂ being produced, we keep on evolving our processes and determination to process materials in the most efficient, sustainable manner.
3
Powered by FlippingBook